This is a plastic adhesive guideline which has been produced for us by an adhesive specialist. We do not sell any adhesives and recommend contacting the below supplier for availability and any other technical support.
| |
Nylon |
Acetal |
PVC |
HDPE |
UHMWPE |
PTFE |
Tufnol |
PEEK |
Polypropylene |
Mild Steel |
Stainless Steel |
Aluminium |
| Nylon |
MA310/GP SPRAY/SAFE80 |
435 |
SAFE 80/MA310 |
480+primer 770 |
480+primer 770 |
536 |
SAFE 80/536 |
435+primer 770 |
DP8005 |
536 |
536 |
536 |
| Acetal |
435 |
435+primer 770 |
435 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
| PVC |
SAFE 80/MA310 |
435 |
3206/1782 |
DP8005 |
DP8005 |
536 |
3206/1782 |
435+primer 770 |
DP8005 |
3206 |
536 |
3206 |
| HDPE |
480+primer 770 |
435+primer 770 |
M590/DP8005 |
M590/DP8005 |
M590/DP8005 |
536 |
536 |
435+primer 770 |
M590/DP8005 |
M590 |
M590 |
M590 |
| UHMWPE |
480+primer 770 |
435+primer 770 |
M590/DP8005 |
M590/DP8005 |
M590/DP8005 |
536 |
536 |
435+primer 770 |
M590/DP8005 |
M590 |
M590 |
M590 |
| PTFE |
536 |
435+primer 770 |
536 |
536 |
536 |
536 |
536 |
435+primer 770 |
536 |
536 |
536 |
536 |
| Tufnol |
SAFE 80/3206 |
435+primer 770 |
3206/1782 |
536 |
536 |
536 |
3206/536 |
435+primer 770 |
536 |
2402 |
536 |
2402 |
| PEEK |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
| Polypropylene |
DP8005 |
435+primer 770 |
DP8005 |
M590/DP8005 |
M590/DP8005 |
536 |
536 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
435+primer 770 |
If you think the adhesive specified is not appropriate for your particular application or you need any more technical help please call Anixter Adhesives technical department on 0114 275 5884
Useful Information
When using 435 adhesive, the primer will only be needed to prepare the plastic not the metals
Abrading HDPE, UHMWPE, PTFE and Polypropylene in particular (other plastics also if required) prior to bonding would increase the bond strength
None of the recommended adhesives above are food safe
Data sheets regarding temperature range and chemical resistance are available from Anixter
The above information has been supplied to us by a third party and we cannot give any guarentees to the accuracy of the information.
| 
